Fuel Filter: Description and Operation

Fuel Filter Location:

DESCRIPTION



The fuel injection system uses an in-line filter. The In-line filter is attached to the nylon fuel lines by special quick connect fittings and retaining clips. If an element should ever become plugged, the engine will stop running. An engine failure caused by a plugged filter element may be preceded by a hesitation or sluggish operation.

Fuel Pump/Fuel Gauge Sending Unit (typical):

OTHER FILTERS AND STRAINERS

A woven plastic filter is located on the lower end of the fuel pick-up pipe in the fuel tank. This filter prevents dirt from entering the fuel line and also stops water from entering the fuel system, unless the filter becomes completely submerged in water. This filter is self-cleaning and normally requires no maintenance. Fuel blockage at this point indicates that the fuel tank contains an abnormal amount of sediment or water. Therefore, the fuel tank should be removed and thoroughly cleaned and the tank filter replaced.