Lock Knob

Door Lock Remote Control Handle & Escutcheon:

Remove or Disconnect

1. Insert a small flat-bladed tool, such as a screwdriver, behind end of lock knob and pry to force it away from rod.
2. After end of rod is free from knob, slide knob rearward to remove from assembly.

Install or Connect

1. Position knob over locking rod and insert end of knob through hole in handle escutcheon.
2. Slide knob forward until end of rod goes into depression in end of knob.
3. Force knob against remote control escutcheon until rod snaps into knob.