Troubleshooting Hints

PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
1. Check I/P Fuse #29. If open, check for a short to ground in CKT 1940.
2. Check that G104 is clean and tight.
^ Check for a broken (or partially broken) wire inside of the insulation which could cause system failure but prove "GOOD" in a continuity/voltage check refer Diagnostic Aids. Diagnostic Aids
^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems refer Diagnostic Aids.
^ Refer to System Diagnosis: Rear Glass Release. System Diagnosis - Rear Compartment/Rear Window Release