Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 1996 >> Regal V6-3.8L VIN K >> Repair and Diagnosis >> Body and Frame >> Locks >> Keyless Entry >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Keyless Entry: Service and Repair

Transmitter Programming

Keyless Entry Programming Procedure:






^ Do the following procedure whenever the Keyless Programming Connector is grounded, the Remote Control Door Lock Receiver (RCDLR) is replaced, the Transmitter is replaced or a second Transmitter is added.

1. Jumper the Keyless Programming Connector to ground (all power door locks will lock and unlock).
2. Operate Transmitter by pressing a single button once (all power door locks will again lock and unlock).
3. To program for a second Portable Transmitter, operate Transmitter 2 by pressing a single button once. In order for programming to be complete, wait for the locks to fully cycle.
4. Disconnect Keyless Programming Connector Jumper after locks have finished cycling.
5. Verify that the Transmitter(s) operate Door Locks and Rear Compartment Lid Release.
pro multis · About Operation CHARM