Heater A/C BI-Level Valve

Vacuum Harness - Passenger Compartment:

Remove or Disconnect

1. Air distributor assembly.
2. Clips and screws attaching air distributor assembly halves, and separate assembly.
3. Vacuum actuator from air distributor assembly by unclipping and disengaging from valve.

Install or Connect

1. Vacuum actuator to air distributor assembly by engaging to valve and clipping into position.
2. Air distributor assembly halves and install attaching clips and screws.

Tighten
^ Screws to 1.5 N.m (13 lb. in.).

3. Air distributor assembly.