Front Suspension

FRONT SUSPENSION

Front Lower Control Arm Ball Stud To:
Steering Knuckle Nut 55 Nm (40 lb ft)*
Front Lower Control Arm Bolts/Screws 68 Nm (50 lb ft)
Front Lower Control Arm Mounting 113 Nm (83 lb ft)
Front Stabilizer Shaft:
Bracket Bolt/Screw 48 Nm (35 lb ft)
Link Nut 23 Nm (17 lb ft)
Front Suspension Strut:
To Body Mount Nuts 41 Nm (30 lb ft)
Mount Nut 85 Nm (63 lb ft)
To Steering Knuckle Bolts/Screws 123 Nm (90 lb ft)
Front Wheel Drive Shaft Bearing Bolts/Screws 130 Nm (96 lb ft)




*Tighten nut to align cotter pin hole with front lower control arm ball stud. DO NOT loosen nut to align cotter pin hole.