Rear Toe Adjustment

Important: Adjust the left rear toe and the right rear toe separately, per wheel.

1. Adjust the adjustment link to the full toe out position.
2. Adjust the adjustment link inward to the correct setting.

Important: The adjustment direction must be from toe out to toe in in order to obtain the proper alignment.

3. Loosen the lock nut on the adjustment link.

NOTICE: Always use the correct fastener in the proper location. When you replace a fastener, use ONLY the exact part number for that application. The manufacturer will call out those fasteners that require a replacement after removal. The manufacturer will also call out the fasteners that require thread lockers or thread sealant. UNLESS OTHERWISE SPECIFIED, do not use supplemental coatings (paints, greases, or other corrosion inhibitors) on threaded fasteners or fastener joint interfaces. Generally, such coatings adversely affect the fastener torque and joint clamping force, and may damage the fastener. When you install fasteners, use the correct tightening sequence and specifications. Following these instructions can help you avoid damage to parts and systems.

4. Rotate the adjustment link to adjust the toe. Refer to WHEEL ALIGNMENT SPECIFICATIONS.

Tighten
Tighten the lock nut to 64 Nm (47 ft. lbs.).