Keyless Entry System Operation

1. Remote driver door unlock: The driver's door unlock when pressing the unlock button on the keyless entry transmitter.
2. Remote all door unlock: All doors unlock when pressing twice (or more) the unlock button on the keyless entry transmitter.
3. Remote all door lock: All doors lock when pressing the lock button on the keyless entry transmitter.
4. Rear compartment lid release: The rear compartment lid opens when pressing the rear compartment button on the keyless entry transmitter.
5. Remote activation verification: The headlamps flashes and/or the horn sounds when using the keyless entry transmitter. Refer to Feature Customization for more information.
6. Remote alarm: The headlamps flashes and the horn sounds alternately for 2 minutes when pressing the alarm button on the keyless entry transmitter. Pressing the alarm button again within 2 minutes stops the remote alarm.

Remote Driver Door Unlock
The RCDLR sends a message to the BCM through circuit 917 to unlocks the driver's door upon pressing once the unlock button on the keyless entry transmitter.

Remote All Door Unlock
The RCDLR sends a message to the BCM through circuit 917 to unlock all doors upon pressing twice (no more than 5 seconds between presses) the unlock button on the keyless entry transmitter.

Remote All Door Lock
The RCDLR sends a message to the BCM through circuit 917 to lock all doors while pressing once the lock button on the keyless entry transmitter. However, the automatic door locks controls door locking as follows:
^ The BCM will not lock the doors when the lockout prevention feature is active.
^ The BCM delays door locking when the last door closed locking feature is active.

Refer to Automatic Door Locks for more information regarding lockout prevention and last door closed locking features. Power Locks

Remote Alarm
When pressing the alarm button on the keyless entry transmitter, the RCDLR sends a message to the BCM through circuit 917 to flash the headlamps and sound the horn alternately for 2 minutes. To stop the alarm, press the alarm button again.

Rear Compartment Lid Release
When pressing the rear compartment button on the keyless entry transmitter, the Remote Control Door Lock Receiver (RCDLR) grounds circuit 253. This action energizes the rear compartment lid release relay, thus applying voltage in circuit 56. Then, the rear compartment lid lock release actuator energizes, releasing the rear compartment lid.

If the transaxle is shifted out of PARK, voltage supply in circuit 275 to the rear compartment lid release relay is interrupted. This action disables the rear compartment lid release feature. Refer to Rear Compartment Lid Release for more information. Trunk / Liftgate

Courtesy Lights Activation
The BCM turns on the courtesy lights when unlocking the doors using the key less entry transmitter. Refer to Interior Lights for more information. Lighting and Horns