Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 1998 >> Riviera V6-3.8L SC VIN 1 >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Electronic Brake Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Electronic Brake Control Module: Service and Repair

REMOVAL PROCEDURE





NOTICE: To prevent equipment damage, never connect or disconnect the wiring harness connection from the Electronic Brakes and Traction Control Module (EBTCM) with the ignition switch in the RUN position.

1. Remove the EBCM/EBTCM connector by rotating the locking clip forward.
2. Remove the mounting nuts.
3. Remove the EBCM/EBTCM by sliding it up and away from the strut tower.



INSTALLATION PROCEDURE





1. Install the EBCM/EBTCM into the lower locating slot. Slide the EBCM/EBTCM downward.

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Install the mounting nuts.
^ Tighten the nuts to 11 Nm (96 inch lbs.).
3. Connect the EBCM/EBTCM connector.
pro multis · About Operation CHARM