Fastener Tightening Specifications - Unit Repair

Bolt, Case Extension 35.5 Nm (26.0 lb ft)
Bolt, Speed Sensor 11.0 Nm (97.5 lb in)
Bolt, FWD Servo Cover 10.0 Nm (88.5 lb in)
Bolt, Oil Pan 11.5 Nm (95.0 lb in)
Ball Check Assembly, Cooler 52.0 Nm (38.5 lb ft)
Connector-cooler (Inverted Flared Tube) 38.0 Nm (28.0 lb ft)
Bolt, Modulator 23.5 Nm (17.3 lb ft)
Plug, Pipe (Line Pressure) 10.5 Nm (93.0 lb in)
Nut, Case Side Cover (Flanged Hex) 8.0 Nm (71.2 lb in)
Screw And Conical Washer Assembly 11.0 Nm (97.5 lb in)
Bolt, Metric Hex (Structural Side Cover) 23.5 Nm (17.3 lb ft)
Bolt, Torx Head (Structural Side Cover) 23.5 Nm (17.3 lb ft)
Stud, Structural Side Cover To Case 23.5 Nm (17.3 lb ft)
Bolt, 2-1 Manual Servo Cover 23.5 Nm (17.3 lb ft)
Bolt, Hex Flange (Accumulator Cover And Housing) 11.0 Nm (97.5 lb in)
Bolt, Pump Cover To Valve Body 11.0 Nm (97.5 lb in)
Bolt, Pump Cover To Pump Body 23.5 Nm (17.3 lb ft)
Bolt, Pump Body To Case 23.5 Nm (17.3 lb ft)
Bolt, Pump Cover To Channel Plate 11.0 Nm (97.3 lb in)
Bolt, Valve Body To Case 23.5 Nm (17.3 lb ft)
Bolt, Valve Body To Channel Plate 11.0 Nm (97.5 lb in)
Bolt, Valve Body To Channel Plate (Torx) 12.0 Nm (9.0 lb ft)
Bolt, Valve Body To Channel Plate 11.0 Nm (97.3 lb in)
Bolt, Special, Valve Body To Case 23.5 Nm (17.3 lb ft)
Bolt, Valve Body To Case 23.5 Nm (17.3 lb ft)
Bolt, Channel Plate To Case 23.5 Nm (17.3 lb ft)
Bolt, Channel Plate To Case 23.5 Nm (17.3 lb ft)
Temperature Sensor 7.0 Nm (62.0 lb in)
Screw, Case To Drive Sprocket Support 23.5 Nm (17.3 lb ft)
Nut, Manual Shaft To Detent Lever 31.5 Nm (23.5 lb ft)
Bolt, Special, Manual Detent Sprig To Channel Plate 11.0 Nm (97.5 lb in)