Antenna Module Replacement

REMOVAL PROCEDURE




IMPORTANT: The antenna is located in the rear window. For window replacement, refer to Rear Window Replacement (Long Method) in Stationary Windows.

1. Remove the right sail panel trim (1).
2. Remove the body harness (5).
Remove the antenna coaxial cable (4) from the antenna module (2).
3. Remove the bolt (3).
4. Disengage the tab on the module (2) from the slot in the sail panel (1).

INSTALLATION PROCEDURE
1. Engage the module tab in the slot in the sail panel (1).
2. Rotate the module down in order to align the hole for the bolt (3).

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the fastener (3).

Tighten
Tighten the fastener to 7.5 N.m (66 lb in).

4. Insert the body harness (5).
5. Insert the antenna coaxial cable (4) to the antenna module (2).
6. Install the right sail panel trim (1).