Message

Use the message feature in order to display text which is broadcast by an RDS station. This feature is only for domestic RDS receivers. Invoke the message feature by pressing the following buttons:
1. ALT
2. MSG

If the currently tuned station is broadcasting messages, MSG is displayed. When the user pressed the MSG button, the display shows the first 12/24 characters of information for 20 seconds. If the user again presses the MSG button within 20 seconds, the next 12/24 characters are displayed. This sequence continues until the entire message is displayed.

The display will return to its appropriate contents under the following conditions:
^ If the display is not changed for 20 seconds
^ If any key except MSG is pressed