Ash Tray: Service and Repair

REMOVAL PROCEDURE
1. Open the ashtray.
2. Remove the fasteners (1) retaining the ashtray.
3. Remove the ashtray partway.
4. Disconnect the electrical connector. Remove the ashtray.

INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Align the ashtray with the lower trim pad.

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the ashtray fasteners (1).

Tighten
Tighten the fasteners to 1.9 N.m (17 lb in).

4. Close the ashtray.