Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Closeout/Insulator Panel Replacement - Right
REMOVAL PROCEDURE
1. Remove the sound insulator screws from the IP.
2. Remove the sound insulator screws (3) and the wing nuts from the studs on the cowl.
3. Pull the sound insulator (2) down and rearward.
4. Remove the courtesy lamp (1).
5. Remove the sound insulator.
INSTALLATION PROCEDURE
1. Install the courtesy lamp (1). Perform the following steps:
1.1. Position the sound insulator (2) under the dash.
1.2. Insert the cowl studs through the holes in front of the insulator.
1.3. Route the passenger inflator module pigtail around the courtesy light.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the sound insulator screws (3) to the IP.
Tighten
Tighten the fasteners to 1.9 N.m (17 lb in).
3. Install the wing nuts to the studs.