Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Lateral Accelerometer: Service and Repair

REMOVAL PROCEDURE

1. Remove the driver's seat. Refer to Seat Replacement.
2. Pull the carpet back to expose the lateral accelerator switch.
3. Disconnect the electrical connector from the lateral accelerator switch.
4. Remove the two screws and the lateral accelerator switch.

INSTALLATION PROCEDURE

NOTICE: Refer to Fastener Notice in Service Precautions.

1. Install the lateral accelerator switch with two screws.
^ Tighten the screws to 2 Nm (18 inch lbs.)

2. Connect the electrical connector to the module.
3. Install the carpet.
4. Install the driver's seat. Refer to Seat Replacement.