Oil Pump: Service and Repair

Removal Procedure
1. Remove the engine front cover.
2. Remove the oil filter adapter.
3. Remove the pressure relief valve and spring.





4. Remove the oil pump cover screws.
5. Remove the oil pump cover.
6. Remove the oil pump gears.

Installation Procedure
1. Lubricate the gears with petroleum jelly.
2. Install oil pump gears.
3. Pack the cavity with petroleum jelly.





4. Install oil pump cover.

Notice: Refer to Fastener Notice in Service Precautions.

5. Install oil pump cover screws.
- Tighten the oil pump cover screws to 11 Nm (98 inch lbs.).
6. Install oil filter adapter.
7. Install engine front cover.