Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
79. Cylinder Head Installation
- Tools Required- J 36660 Torque Angle Meter
1. Install the cylinder head gasket. Ensure the arrows point towards the front of the engine. The left cylinder head gasket has the letter L stamped next to the arrow.
Notice: Refer to Permanently Stretching Bolt Notice in Service Precautions.
2. Install the cylinder head.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install new cylinder head bolts.
- Tighten the cylinder head bolts to 50 Nm (37 ft. lbs.) in sequence.
- Use J 36660 to rotate each cylinder head bolt 120 degrees in sequence.
- Use J 36660 to rotate the four center cylinder head bolts an additional 30 degrees in sequence.