Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Door Lamp: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the lamp housing. Insert a flat bladed tool under the forward edge of the housing to depress the retaining clip.
3. Disconnect the electrical connector.
4. Remove the bulbs as necessary. Pliers may be needed in order to rotate the bulbs out of the housing.

INSTALLATION PROCEDURE
1. Install the bulb holders and/or bulbs.
2. Connect the electrical connector.
3. Snap the door lamp housing into the trim panel.
4. Connect the negative battery cable.