Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Alarm Module: Service and Repair
REMOVAL PROCEDURE
1. Remove the IP storage compartment insert.
2. Remove the fastener from the rear edge of the module.
3. Remove the PASS-Key� II module from the bracket (1).
4. Disconnect the electrical connection(s).
INSTALLATION PROCEDURE
1. Connect the electrical connection(s).
2. Install the PASS-Key� II module to the bracket (1).
3. Install the fastener.
4. Install the IP storage compartment.