Installation Procedure

1. Install the Inflatable Restraint Front End Discriminating Sensor (2) to the front end discriminating sensor bracket (4).

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the Inflatable Restraint Front End Discriminating Sensor mounting fasteners (1).

Tighten
Tighten fastener to 12 N.m (9 lb ft).





3. Connect the Inflatable Restraint Front End Discriminating Sensor harness connector to the pigtail connector.





4. Install the Connector Position Assurance (CPA) (1) to the Inflatable Restraint Front End Discriminating Sensor harness connector (2).
5. Enable the SIR system.