Cruise Release Switch Replacement

REMOVAL PROCEDURE

IMPORTANT: Connect the brake booster pushrod to the brake pedal assembly before attempting to adjust the release switch assembly (1) and the stoplamp switch assembly (2).

1. Remove the left insulator panel.
2. Disconnect the electrical connector.
3. Remove the release switch assembly (2).

INSTALLATION PROCEDURE
1. Install the release switch assembly (2).
2. Connect the electrical connector.

IMPORTANT: An incorrect adjustment may cause the cruise control system to work improperly.

3. Adjust the switch. Refer to Cruise Release Switch Adjustment. Cruise Release Switch Adjustment
4. Install the left insulator panel.