Suspension Control Module: Service and Repair

REMOVAL PROCEDURE





1. Remove the driver's seat. Refer to Seat Replacement.
2. Pull the carpet back to expose the control module.
3. Disconnect the electrical connector from the control module.
4. Remove the two screws and the control module.

INSTALLATION PROCEDURE

NOTICE: Refer to Fastener Notice in Service Precautions.





1. Install the control module with two screws.
- Tighten the screws to 2 Nm (18 inch lbs.)

2. Connect the electrical connector to the module.
3. Install the carpet.
4. Install the driver's seat. Refer to Seat Replacement.