A/T Range Selector Cable Replacement (At PNP Switch)

Removal Procedure





Caution: The automatic transaxle range selector cable is made out of two cable sections. After initial connection never separate the two metal couplings from one another. Integrity of the connection of the two metal couplings will be lost if separation of the two metal couplings occurs. When servicing the transaxle remove the cable at the automatic transaxle range selector lever and at the automatic transaxle range selector cable bracket. If either section of the cable needs to be replaced, replace both of the cable sections. Loss of connection integrity of the two metal couplings can cause loss of transaxle shift control which could result in personal injury.

1. Remove the throttle body air inlet duct.
2. Remove the automatic transaxle range selector cable from the wiring harness clip or strap.
3. Remove the automatic transaxle range selector cable from the automatic transaxle range selector lever.





4. Remove the automatic transaxle range selector cable from the automatic transaxle range selector cable bracket.
5. Remove the automatic transaxle range selector cable from the console shift control or the column shift control. Refer to A/T Range Selector Cable Replacement (A/T Console Switch)
6. Pull the automatic transaxle range selector cable through the dash from the engine compartment side.

Installation Procedure





Caution: The automatic transaxle range selector cable is made out of two cable sections. After initial connection never separate the two metal couplings from one another. Integrity of the connection of me two metal couplings will be lost if separation of the two metal couplings occurs. When servicing the transaxle remove the cable at the automatic transaxle range selector lever and at the automatic transaxle range selector cable bracket. If either section of the cable needs to be replaced, replace both of the cable sections. Loss of connection integrity of the two metal couplings can cause loss of transaxle shift control which could result in personal injury.





1. Insert the automatic transaxle range selector cable through the dash from the engine compartment side.
2. Install the automatic transaxle range selector cable to the automatic transaxle range selector cable bracket.
3. Install the automatic transaxle range selector cable to the automatic transaxle range selector lever.
4. Install the automatic transaxle range selector cable to the wiring harness clip or strap.
5. Install the automatic transaxle range selector cable to the console shift control. Refer to A/T Range Selector Cable Replacement (At Console Switch)
6. Adjust the automatic transaxle range selector cable. Refer to A/T Range Selector Cable Replacement (New Cable Installation)
7. Install the Air cleaner intake duct.