Window Run Channel Replacement - Front Door

REMOVAL PROCEDURE

CAUTION: Disconnect the power window switch when working inside the drivers door. When operated, the Express Down feature allows the door window to drop very quickly, which could cause personal injury.




1. Remove the trim panel.
2. Remove the trim panel brackets (if applicable).
3. Remove the water deflector.
4. Remove the plastic wiring harness shield.
5. Remove the window channel fasteners (2).
6. Move the lower run channel down and to the rear in order to clear the module.
7. Remove the front window channel.

INSTALLATION PROCEDURE




1. Install the front window channel.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the window channel fasteners (2).

Tighten
Tighten the fasteners to 12 N.m (106 lb in).

3. Install the plastic wiring harness shield.
4. Secure the shield.
5. Install the water deflector.
6. Install the trim panel.