Window Run Channel Replacement - Front Door Rear

REMOVAL PROCEDURE

CAUTION: Disconnect the power window switch when working inside the drivers door. When operated, the Express Down feature allows the door window to drop very quickly, which could cause personal injury.




1. Remove the door trim panel.
2. Remove the water deflector.
3. Remove the fasteners.
4. Move the lower window channel (2) downward and to the front.
5. Remove the window channel (2) through the opening at the front of the door module.

INSTALLATION PROCEDURE




1. Install the front window channel (2).
2. Place the window channel into approximate position with the wire harness behind the channel.
3. Line up the window channel on the window and slide the window channel (2) upward in order to engage the retainer.
4. Push upward and align the lower bracket with the screw hole.

NOTE: Refer to Fastener Notice in Service Precautions.

5. Install the fastener.

Tighten
Tighten the fastener to 10 N.m (88 lb in).

6. Install the water deflector.
7. Install the door trim panel.