Rear Door Window Glass Weatherstrip: Service and Repair

REMOVAL PROCEDURE




1. Remove the trim panel.
2. Remove the water deflector.
3. Remove the two fasteners (2).
4. Lower the window channel (1) to the bottom of the door.
5. Remove the window channel through the opening below the door module.

INSTALLATION PROCEDURE




1. Install the window channel (1).

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the fasteners (2).

Tighten
Tighten the bolts to 12 N.m (106 lb in).

3. Install the water deflector.
4. Install the trim panel.