Front Floor Console Trim Plate Replacement

REMOVAL PROCEDURE




1. Remove the shifter handle (2) after the retainer (1) is removed.
Pull upward in order to remove the handle.




2. Remove the upper console trim plate.
3. Remove the fasteners (1) that retain the shifter trim plate to the console.




4. Remove the shifter trim plate (2).
Pull up in order to disengage the retaining tabs.
5. Disconnect the connectors from the shifter trim plate (2).

INSTALLATION PROCEDURE




1. Connect the connectors to the shifter trim plate (2).
2. Install the shifter trim plate (2) to the console assembly.
Push down in order to seat the retaining tabs.




NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the fasteners (1) in order to retain the trim plate to the console.

Tighten
Tighten the fasteners to 1.9 N.m (17 lb in).




4. Install the upper console trim plate.
5. Install the shifter handle.
Push down on the shaft in order to install the shifter handle (2).
6. Install the retainer (1).