A Important Preliminary Checks

Before using this section perform a Powertrain On-Board Diagnostic (OBD) System Check and verify all of the following items:
^ The PCM and MIL are operating properly.
^ There are no DTCs stored.
^ Ensure that the Engine Coolant Temperature is not above 128°C (262°F). This condition will cause the PCM to operate in Coolant Hot Mode. While in Coolant Hot Mode, The PCM will turn off fuel to three cylinders to keep engine temperatures from reaching damaging levels. Coolant Hot Mode will be perceived as a lack of power, miss, or rough idle. If the engine is operating in Coolant Hot Mode, refer to Engine Overheating.
^ Scan tool data is within normal operating range. Refer to Engine Scan tool Data List.
^ Verify the customer complaint and locate the applicable symptoms. Perform the procedure included in the symptom diagnostic table.