Rear Integration Module Replacement

REMOVAL PROCEDURE




1. Before replacing the RIM, record the personalization settings to transfer to the new module (if they are available). Refer to BCM Programming/RPO Configuration (DIM) or BCM Programming/RPO Configuration (IPM) or BCM Programming/RPO Configuration (RIM).
2. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
3. Remove the rear seat back. Refer to Seat Back Replacement - Rear in Seats.
4. Move the rear seat back insulator aside.
5. Remove the push pin retainers (1).
6. Disconnect the rear integration module (RIM) electrical connectors (3).
7. Remove the RIM (2).

INSTALLATION PROCEDURE




1. Install the RIM (2).
2. Connect the RIM electrical connectors (3).
3. Install the RIM (2) with the push pin retainers (1).
4. Reposition the rear seat back insulator.
5. Install the rear seat back. Refer to Seat Back Replacement - Rear in Seats.
6. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
7. Reprogram the RIM. Refer to BCM Programming/RPO Configuration (DIM) or BCM Programming/RPO Configuration (IPM) or BCM Programming/RPO Configuration (RIM). Programming and Relearning