Instrument Panel (IP) - Endcap Replacement - Left

REMOVAL PROCEDURE




1. Remove the knee bolster. Refer to knee Bolster Replacement.
2. Remove the left instrument panel (IP) accessory trim plate.
3. Remove the left windshield pillar garnish molding.
4. Pull the IP endcap outward in order to remove.

INSTALLATION PROCEDURE




1. Align the instrument panel (IP) endcap retainers to the openings in the IP.
2. Push the IP endcap into the IP, ensuring all the retainers engage.
3. Install the left windshield pillar garnish molding.
4. Install the left IP accessory trim plate.
5. Install the knee bolster. Refer to knee Bolster Replacement.