Generator Brace Replacement

REMOVAL PROCEDURE




1. Remove the generator front brace nut at the engine intake manifold.
2. Remove the generator bolt.
3. Remove the generator front brace assembly.

INSTALLATION PROCEDURE




1. Position the generator front brace assembly to the generator and the engine stud on the engine intake manifold.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the generator bolt.

Tighten
Tighten the generator bolt to 50 N.m (37 lb ft).

3. Install the generator front brace nut at the engine intake manifold.

Tighten
Tighten the generator front brace nut to 25 N.m (18 lb ft).