Fuel Filler Pocket Replacement (Aztek)

Fuel Filler Pocket Replacement (Aztek)

Removal Procedure





1. Remove the screw from the fuel filler pocket.
2. Remove the fuel filler cap from the fuel filler neck.
3. Remove the fuel filler pocket from the fuel filler neck.




4. Remove the fuel filler cap from the fuel filler pocket by compressing the retainer on the fuel filler cap tether and pulling through the fuel filler pocket drain hole.



Installation Procedure





1. Install the fuel filler cap to the fuel filler pocket by compressing the retainer on the fuel filler cap tether and pushing the tether through the fuel filler pocket drain hole.




2. Install the fuel filler pocket to the fuel filler neck, pressing into place until fully seated.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the screw to the fuel filler pocket.

Tighten the fuel filler pocket screw to 2 N.m (18 lb in).

4. Install the fuel filler cap to the fuel filler neck.