Instrument Panel (IP) - Multifunction Switch Assembly Replacement

REMOVAL PROCEDURE




1. Remove the I/P accessory trim plate.




2. Remove the bolts from the switch assembly.




3. Remove the electrical connectors from the switch assembly.
4. Remove the switch assembly.

INSTALLATION PROCEDURE




1. Install the electrical connections to the switch assembly.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the bolts to the switch assembly of the rear object alarm module.

Tighten
Tighten the bolts to 2 N.m (18 in lb)




3. Install the I/P accessory trim plate.