Trim Panel Replacement - Rear Quarter

Trim Panel Replacement - Rear Quarter (Rendezvous)

Removal Procedure

1. Remove the third row seat. Refer to Seat Replacement - Rear No. 2 (Buick) (Seat Replacement - Rear No. 2 (Buick)) in Seats.
2. Remove the seat belt guide loops from the rear seat and from the third row seat. Refer to Seat Belt Retractor Replacement - Rear and to Seat Belt Retractor Replacement - No. 3 Rear (Rendezvous) in Seat Belts.
3. Remove the Upper Trim Panels from rear quarter.




4. Remove the bolts which secure the cargo net tie-down loops.
5. Remove the cargo net tie-down loops from the rear quarter trim panel.
6. Remove the rear quarter trim panel from the vehicle.



Installation Procedure





1. Install the rear quarter trim panel to the vehicle.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the cargo net tie-down loops to the rear quarter trim panel. Secure the loops with bolts.

Tighten the bolts to 6 N.m (53 lb in).

3. Install the Upper Trim Panels.
4. Install the seat belt guide loops to the rear seat and from the third row seat. Refer to Seat Belt Retractor Replacement - Rear and to Seat Belt Retractor Replacement - No. 3 Rear (Rendezvous) in Seat Belts.
5. Install the third row seat. Refer to Seat Replacement - Rear No. 2 (Buick) (Seat Replacement - Rear No. 2 (Buick)) in Seats.