Luggage Carrier Replacement

REMOVAL PROCEDURE




1. Remove the luggage carrier side rail trim covers from the rear of the rails.




2. Lift up the levers on the luggage carrier cross rails to unlock them from the side rails.
3. Remove the luggage carrier cross rails from the side rails by sliding them rearward.




4. Remove the luggage carrier side rail screws from the side rails.
5. Remove the luggage carrier side rails from the roof.

INSTALLATION PROCEDURE




1. Position the luggage carrier side rails to the roof.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the luggage carrier side rail screws to the luggage carrier.

Tighten
Tighten the luggage carrier side rail screws to 6 N.m (53 lb in).




3. Lift up on the luggage carrier cross rail levers in order to engage the cross rails into the side rails.
4. Slide the luggage carrier cross rails to the desired position.
5. Release the levers on the luggage carrier cross rails to lock them into position.




6. Install the luggage carrier side rail trim covers to the slots in the rails, pressing into place until fully seated.