Tire Monitoring System: Service and Repair

TO RESET (CALIBRATE) THE SYSTEM

NOTICE: Don't reset the check tire pressure system without first correcting the cause of the problem and checking and adjusting the pressure in all four tires. If you reset the system when the tire pressures are incorrect the check tire pressure system will not work properly and may not alert you when a tire is low.

1. Place the vehicle in PARK (P) and remove your foot from the brake pedal. The brake pedal should not be depressed during this procedure.

2. Turn the ignition to ON with the engine off.

3. Press the MODE button until the DIC reads LOW TIRE PRESSURE HOLD SET TO RESET.

4. Press and hold the SET button until you hear a chime and TIRE PRESSURE RESET is displayed.

You will hear three chimes and the LOW TIRE PRESSURE message will go off and the DIC will return to TIRE PRESSURE NORMAL. If the LOW TIRE PRESSURE message comes back on, the check tire pressure system has not reset. Repeat the procedure.