Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Scan Tool Data Definitions
8-Digit GM Part Number: The scan tool displays the 8 Digit GM Part Number. The scan tool displays the part number of the Control module.# of Learned Key Codes: The scan tool displays 1-10. The scan tool displays the number of transponder values learned by the theft deterrent controller (VTD) module.
Auto Learn Timer: The scan tool displays 0 - 2550 seconds. The scan tool displays the current state of the Auto. Learn Timer, which must time out three times in order for the relearn procedure to be complete.
Calibration ID: The scan tool displays the Calibration ID. Display indicates the calibration ID of the VTD module.
CTD Alarm State: The scan tool displays Close Dr. Wait/Open Dr. Wait/Lever Active/Trigger Idle/Armed/Full Alarm. The scan tool displays the current state of the CTD system.
CTD Enable: The scan tool displays On/Off. The scan tool displays On when the CTD system is armed and Off when the CTD system is in standby.
Driver Door Open Sw.: The scan tool displays Open/Closed. Display indicates the current state of the driver door open switch. Open indicates the door is open and Closed indicates the door is closed.
Ignition Counter: The scan tool displays 0-50. The module counts each time the ignition is cycled from ON to OFF.
Julian Date of Module: The scan tool displays the Julian Date of Build. Display indicates the date the module was built.
Key Cylinder Unlock: The scan tool displays Active/Inactive. The scan tool displays Active when the door key cylinder is rotated to the unlock position.
Key In Ignition: The scan tool displays Active/Inactive. The scan tool displays Active when the ignition key is in the ignition and inactive when it is not in the ignition.
LH Liftgate Ajar Switch: The scan tool displays Active/Inactive. The scan tool displays Active when the left liftgate latch is ajar or open.
Liftgate Key Cyl. Unik.: The scan tool displays Active/inactive. The scan tool displays Active when the liftgate key cylinder unlock is rotated to the unlock position.
Liftgate Open Switch: The scan tool displays Active/Inactive. Display Indicates the current state of the liftgate open switch. Active indicates the liftgate is open and Inactive indicates the liftgate is closed.
Liftgate Sensor: The scan tool displays Open/Closed. Display indicates the current state of the liftgate sensor. Open Indicates the liftgate is open, and Closed indicates the liftgate is closed.
Manufactures Enable Counter: The scan tool displays 0-255. The Manufactures Enable Counter is cleared prior to leaving the assembly plant. This data value is for use at the assembly plant only.
Park Lamp Monitor: The scan tool displays Active/inactive. The scan tool displays the commanded state of the Park lamp relay.
Passenger Door Open Sw.: The scan tool displays Open/Closed. Display Indicates the current state of the passenger door open switch. Open indicates the door is open and Closed Indicates the door is closed.
PCM/VTD in Fall Enable: The scan tool displays Yes/No. The scan tool displays NO when the PCM is in fall enable. This indicates a failure occurred In the VTD system.
Prom ID: The scan tool displays the PROM ID. The scan tool displays the 4 digit Internal PROM ID of the module.
Rear Door Open Switch: The scan tool displays Active/Inactive. Display indicates the current state of the rear door open switch. Active indicates the door Is open and inactive indicates the door is closed.
RH Liftgate Ajar Switch: The scan tool displays Active/Inactive. The scan tool displays Active when the right liftgate latch is ajar or open.
Security Lamp Status: The scan tool displays On/Off/Flash. The scan tool displays the current state of the security indicator as commanded by the VTD system.
Security LED: The scan tool displays On/Off. The scan tool displays the current state of the security LED indicator as commanded by the body control module (BCM). On indicates the BCM is commanding the security LED indicator on and off indicates the BCM is commanding the security LED off.
Seed and Key Timer: The scan tool displays 0 - 2550 seconds, The scan tool displays the current state of the Seed and Key Timer, which must time out in order for the relearn procedure to be complete.
VTD Auto Learn Timer: The scan tool displays Active/Inactive. The scan tool displays the current state of the Auto. Learn Timer, which must time out three times in order for the relearn procedure to be complete.
VTD Fuel Disable: The scan tool displays Active/Inactive. The scan tool displays Active when the PCM has received a disable password from the VTD system.
VTD Fuel Disable Until Ign. Off: The scan tool displays Yes/No. The scan tool displays Yes when the PCM has received the fuel disable password from the VTD system. This indicates the PCM will not allow fuel delivery until the ignition is switched off prior to another start attempt.
VTD States: The scan tool displays Ign Off/Monitor Key/Learn More Keys/No Coded Key/Auto Learn Pending. The scan tool displays Monitor Key when the ignition in ON and the VTD module is monitoring the key transponder value.
Year Module Built: The scan tool displays the year the module was built.