Ignition Switch

Ignition Switch Replacement - On Vehicle

Removal Procedure





1. Disable the SIR system.
2. Remove the steering column trim covers.
3. Pull the theft deterrent control module (2) away from the lock cylinder housing (1).





4. Simultaneously depress the two white spring loaded ignition switch retainers.
5. Slide the ignition switch downward away from the ignition lock cylinder case.
6. Disconnect the ignition switch electrical connector from the ignition switch.

Installation Procedure





1. Connect the ignition switch electrical connector to the ignition switch.
2. Slide the ignition switch into the ignition lock cylinder case.





3. Push the theft deterrent module (2), onto the lock cylinder housing (1).
4. Install the steering column trim covers.
5. Enable the SIR System.