Programming Features - Without Keyless Entry - RPO AUO

ENTER PROGRAMMING
To enter the programming mode, perform the following actions:
1. Turn the ignition to RUN.
2. Place the vehicle in PARK.
3. Ensure that the distance odometer is displayed, and that the trip odometer is not visible.
4. Press and hold the TRIP/RESET button on the instrument panel for two seconds.

The PROGRAM MODE illuminates on the I/P providing the status.

AUTOMATIC DOOR LOCKS
Continue with the following steps in order to personalize the automatic door locks:
1. Press the power door lock switch. The vehicle will chime with the number of chimes corresponding to the current mode, see Automatic Door Locks modes above.
2. Press the power door lock switch again in order to advance to the next mode. The vehicle will chime with the number of chimes corresponding to the mode.
3. Continue to press the power door lock switch until the desired mode is reached.

DELAYED LOCKING
Continue with the following steps in order to personalize the delayed locking feature:
1. Press the power door unlock switch. The vehicle will chime with the number of chimes corresponding to the current mode,(see Delayed Locking modes above.
2. Press the power door unlock switch again in order to advance to the next mode. The vehicle will chime with the number of chimes corresponding to the mode.
3. Continue to press the power door unlock switch until the desired mode is reached.

HEADLAMP EXIT DELAY
Continue with the following steps in order to personalize the headlamp exit delay feature:
1. Turn the park lamps ON. The vehicle will chime with the number of chimes corresponding to the current mode, see Headlamp Exit Delay modes above.
2. Turn the park lamps OFF then back ON in order to advance to the next mode. The vehicle will chime with the number of chimes corresponding to the mode.
3. Continue to cycle the park lamp switch until the desired mode is reached.

EXIT PROGRAMMING
Any of the following list of events will cause the programming sequence to be terminated:
^ The ignition is moved from the RUN position.
^ The vehicle is shifted out of PARK.
^ The TRIP/RESET button on the instrument panel is pressed.
^ The programming time expires.