Power Accessory Receptacle Replacement - Floor Console
ACCESSORY POWER RECEPTACLE REPLACEMENT - FLOOR CONSOLETOOLS REQUIRED
J 42059 Cigarette Lighter Socket Remover
REMOVAL PROCEDURE
1. Remove the accessory power receptacle fuse.
2. Remove the accessory power receptacle by placing one side of the "T" portion of J 42059 into the receptacle opening. Angle the other side into the opposite opening. Pull the accessory power receptacle straight out.
3. If the standard method fails to remove the receptacle, use the following alternate method:
3.1. Insert a small grinding tool with a cutoff wheel into the receptacle.
3.2. Remove the plastic latches in the 3 mm (0.11 in) square windows.
3.3. Use J 42059 as directed above to remove the receptacle.
4. Remove J 42059.
5. Disconnect the electrical connector from the front floor console accessory power receptacle.
6. Remove the accessory power receptacle retainer.
INSTALLATION PROCEDURE
1. Align the accessory power receptacle retainer to the slot in the console opening.
2. Install the retainer by pressing into place until fully seated.
3. Connect the electrical connector to the front floor console accessory power receptacle.
4. Install the accessory power receptacle to the front floor console. Press into place until fully seated.
5. Install the accessory power receptacle fuse.
6. Inspect the accessory power receptacle for proper operation.