Operation CHARM: Car repair manuals for everyone.

Crankshaft: Specifications

Crankshaft End Play 0.060 - 0.210 mm (0.0024 - 0.0083 inch)
Crankshaft Main Journal Diameter 67.239 - 67.257 mm (2.6473 - 2.6483 inch)
Crankshaft Main Journal Out-of-Round 0.005 mm (0.0002 inch)
Crankshaft Main Journal Taper 0.005 mm (0.0002 inch)
Crankshaft Rear Flange Runout 0.04 mm (0.0016 inch)
Crankshaft Reluctor Ring Runout - Max 0.34 mm (0.0134 inch)
Crankshaft Runout 0.025 mm (0.0010 inch)

Measure the crankshaft end play.
1. Thrust the crankshaft forward or rearward.
2. Insert a feeler gage between the number 3 crankshaft bearing and the bearing surface of the crankshaft and measure the bearing clearance. The proper crankshaft end play clearance is 0.06 - 0.21 mm (0.002 - 0.008 inch).
3. If the bearing clearance is not within specifications, inspect the thrust surfaces for nicks, gouges or raised metal. Minor imperfections may be removed with a fine stone