Air Distribution Duct

REMOVAL PROCEDURE
1. Remove the instrument panel trim pad.




2. Remove the center air duct mounting screw.
3. Remove the center air duct distribution.




4. Remove the side air ducts mounting screws and side air distribution ducts.

INSTALLATION PROCEDURE




1. Install the center air distribution duct.
2. Install the center air distribution duct mounting screw.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the screw to 1.5 N.m (13 lb in).




3. Install the right and left side air distribution duct.
4. Install the right and left side air distribution duct mounting screws.

Tighten
Tighten the screws to 1.5 N.m (13 lb in).

5. Install the instrument panel.