Scan Tool Data Definitions
The SIR scan tool data definitions contain a brief description of all SIR related parameters available on the scan tool. The parameters that are available on the scan tool are listed below in alphabetical order.8-Digit GM Part Number: The scan tool displays the GM part number that is stored within the SDM memory.
Calibration ID: The scan tool displays the calibration ID, which is the check sum of the SDM read only memory contents.
Component Serial Number: The scan tool displays the SDM component serial number that is stored within the SDM.
Driver Side Belt Status: The scan tool displays whether the driver seat is buckled or unbuckled.
Driver Side Impact Sensor (SIS) ID: The scan tool displays the driver SIS ID that is sent to the SDM when the ignition is turned ON.
Ignition Voltage: The scan tool displays 0 - 20 volts. This is the system voltage measured by the SDM between the ignition input and ground.
Julian Date of Build: The scan tool displays a 3 digit number. An example would be 204. This number represents July 23, which is day 204 based on the Julian Calendar.
PROM ID: The scan tool displays the programmable read-only memory (PROM) ID.
Year Module Built: The scan tool displays what year the module was built.