Trim Plate Replacement - Console Front

Trim Plate Replacement - Console Front

Removal Procedure





1. Remove the front floor console trim plate starting at the front and working back, pulling the front floor console trim plate upward in order to release the tabs from the retainers.
2. Disconnect the electrical connectors from the traction control switch, if equipped. Refer to Traction Control Switch Replacement in Antilock Brake System.
3. Remove the front floor console trim plate from the vehicle.



Installation Procedure





1. Connect the electrical connectors to the traction control switch. Refer to Traction Control Switch Replacement in Antilock Brake System.
2. Position the front floor console trim plate tabs to the retainers in the front floor console.
3. Install the front floor console trim plate pressing down until the tabs are fully seated.