Driver Information Center Switch Replacement
DRIVER INFORMATION CENTER SWITCH REPLACEMENTREMOVAL PROCEDURE
1. Remove the steering column opening filler.
2. Disconnect the electrical connectors from the driver information center.
3. Depress the retainers on the driver information center, use a small flat-bladed tool.
4. Remove the driver information center from the steering column filler.
INSTALLATION PROCEDURE
1. Position the driver information center to the steering column filler.
2. Install driver information center, pressing in until the retainers are fully seated.
3. Connect the electrical connectors to the driver information center.
4. Install the steering column opening filler.