Fuel Filler Pocket Replacement

Fuel Filler Pocket Replacement

Removal Procedure





1. Open the fuel filler door.
2. Remove the fuel filler cap.
3. Remove the bolts from the fuel filler pocket at the fuel filler neck.




4. Apply tape to the opening around the fuel filler pocket
5. Remove the fuel filler pocket using a small flat-bladed tool, pressing down and out from the top edge of the fuel filler pocket.



Installation Procedure





1. Install the fuel filler pocket to the fuel filer neck.
2. Press in until the fuel filler pocket is fully seated to the quarter panel.

Notice: Refer to Fastener Notice in Cautions and Notices.





3. Install the bolts.

Tighten the fuel filler neck bolts to 5 N.m (44 lb in).

4. Remove all tape from fuel filler pocket opening.
5. Replace the fuel filler cap.
6. Close the fuel filler door.