Blower Motor: Service and Repair

BLOWER MOTOR REPLACEMENT

REMOVAL PROCEDURE
1. Remove the right side sound insulator.




2. Disconnect the electrical connector (1) from the blower motor.
3. Disconnect the blower ventilation tube (2) from the module.




4. Remove the blower motor screws (1).
5. Remove the blower motor from the housing.

INSTALLATION PROCEDURE
1. Install the blower motor into the housing.

NOTE: Refer to Fastener Notice in Service Precautions.




2. Install the blower motor screws (1).

Tighten
Tighten the screws to 1.7 N.m (15 lb in).




3. Install the blower ventilation tube (2) to the module.
4. Connect the blower motor electrical connector (1).
5. Install the right side sound insulator.