Air Bag Harness: Service and Repair
INFLATABLE RESTRAINT SIDE IMPACT MODULE WIRING HARNESS REPLACEMENTREMOVAL PROCEDURE
1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or to SIR Disabling and Enabling Zone 9.
CAUTION: Refer to SIR Inflator Module Handling and Storage Caution in Service Precautions.
2. Removal of passenger or driver inflatable restraint side impact inflator module wiring harness uses the same procedure.
3. Remove the inflatable restraint side impact inflator module (2) from seat (1).
4. With seat back cover (3) in the open position the inflatable restraint side impact inflator module wiring harness (4) will be expose.
5. Remove the retaining clips that secure the side impact inflator module wiring harness (4) to seat (1).
INSTALLATION PROCEDURE
1. Install the new side impact inflator module wiring harness (4) to seat (1).
2. Install the retaining clips that secure the side inflator module wiring harness (4) to seat (1).
3. Install the inflatable restraint side impact inflator module (2) to seat (1).
4. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or SIR Disabling and Enabling Zone 9.