Seat Belt Replacement - Rear

REMOVAL PROCEDURE

NOTE: Refer to Servicing and Replacing Seat Belts Notice in Service Precautions.




1. Remove the rear seat cushion.
2. Remove the rear shelf trim panel.
3. Remove the rear seat belt retractor.
4. Remove the rear seat belt anchor fastener from the floor.

INSTALLATION PROCEDURE
1. Install the rear seat belt retractor.




2. Install the rear seat belt anchor fastener to the floor.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the anchor fastener to 41 N.m (30 lb ft).

3. Install the rear seat cushion.
4. Install the rear shelf trim panel.