Starter Motor: Service and Repair

REMOVAL PROCEDURE
1. Disconnect the battery negative cable.

3. Remove the torque converter cover.




4. Disconnect the battery positive cable from the starter.
5. Disconnect the wire from the solenoid S terminal on the starter.




6. Remove the 2 starter motor mounting bolts.
7. Remove the starter motor.

INSTALLATION PROCEDURE




1. Install the starter motor.
2. Install the starter motor mounting bolts.

NOTE: Refer to Fastener Notice in Service Precautions.

Tighten
Tighten the starter motor mounting bolts to 43 N.m (32 lb ft).




3. Connect the battery positive cable to the starter.

Tighten
Tighten the battery positive cable to the starter nut to 10 N.m (89 lb in).

4. Connect the starter motor S terminal wire.

Tighten
Tighten the solenoid S terminal nut to 2.5 N.m (22 lb in).

5. Install the torque converter cover.
6. Lower the vehicle.
7. Connect the battery negative cable.